10.4.4 Lab – Build a Switch and Router Network (Answers)
Objectives Part 1: Initialize Devices and Configure the Topology Configure Devices and Verify Connectivity in Part 2 Context / Scenario This is a thorough lab that goes over previously covered IOS commands. You will wire the equipment in this lab according to the topology diagram. The devices will then be configured to match the addressing table. After you've saved your settings, you'll validate them by checking for network connection. After configuring the devices and verifying network connection, you'll use IOS commands to get information from the devices in order to answer questions about your network equipment. This lab gives just a cursory overview of the instructions required to set up the router. Assess your knowledge by configuring the devices without consulting the material or past activity. Cisco 4221 routers running Cisco IOS XE Release 16.9.4 are utilised in the CCNA hands-on labs (universalk9 image). Cisco Catalyst 2960 switches running Cisco IOS Release 15.2(2...