1.1.7 Lab – Basic Switch Configuration Answers
Objectives Part 1: Connect the network cables and confirm the default switch configuration. Part2: Configure fundamental network device settings Configure the switch's basic settings. Configure the IP address of the PC. Part 3: Validate and test network connectivity Display configuration of the device. Ping is used to test end-to-end connectivity. Telnet is used to test remote management capabilities. Part 4: Administration of the MAC Address Table Record the host's MAC address. Determine the MAC addresses learned by the switch. List the options for the show mac address-table command. Configure a fixed MAC address. Context / Scenario The switch virtual interface is an IP address that can be configured on Cisco switches (SVI). The management address, or SVI, can be used for remote access to the switch in order to display or configure settings. If an IP address is assigned to the SVI of VLAN 1, all ports in VLAN 1 have access to that IP address by default. In this lab, you will...